Display not included


1030.33 EUR

865.82 EUR

Not on stock Not possible to order, wait for stocking. If you have any questions, please contact us.

Product Price incl. VAT Add to Cart
LCD display C961 for mid-drive LCD display C961 for mid-drive code: EVLCD-CMS-C961
57.03 EUR
LCD display C965 for mid-drive LCD display C965 for mid-drive code: EVLCD-CMS-C965
69.82 EUR
Full color LCD display C18 for mid-drive Full color LCD display C18 for mid-drive code: EVLCD-CMS-C18
116.57 EUR 122.79 EUR
Full color LCD display 500c for mid-drive Full color LCD display 500c for mid-drive code: EVLCD-CMS-500C
74.49 EUR

It is necessary to buy a display to control the set ►

The motor is mounted in the frame instead of the pedal center. Thanks to the fact that the engine is installed in the middle of the wheel, the optimum center of gravity is achieved and driving characteristics are not limited. It is resistant to the ingress of dust and water jets (IP65). The motor is designed for center axles measuring 68 - 72 mm. The advantage of central drives is that they have a range of up to 35% longer than the hub-drive motor. They are so versatile that they can be installed on 99% of series-produced bicycles. More about the engine ►

TIP: In the Parameters, Downloads and Video tutorials tabs you will find all technical information about the whole set, videos for its installation and manuals in PDF.

The EVBIKE 20 Ah (720 Wh) battery is very easy to install on the bike frame instead of the bottle holder. By placing the battery in the middle of the wheel, the optimum center of gravity is achieved. The battery is equipped with a security lock against theft. After unlocking, it can be easily removed from the holder, eg during charging or transport. The battery includes an intelligent protective BMS module for balancing cells, their protection against undercharging and discharge. The battery has no memory effect and does not support recuperation. More about battery ►

TIP: Connect the charger to the mains first and then connect the charging connector to the battery. Otherwise, the connectors may be damaged.

TIP: Calculate how far you will go with this set. Try our range calculator ►

Package contents:

  • Motor 36 V, 250 W
  • Frame battery 36 V, 20 Ah
  • Charger 5 A
  • Main cable bundle with 4 outputs
  • Speed ​​sensor with magnet
  • Chainring 46T with a protective cover
  • L + R crank handle
  • Mounting material (screws and nuts)
TIP: Before installing the motor, we recommend purchasing special wrenches to tighten the lock and counter nuts and thread glue.
TIP: If you are wondering if your bike can be electrified, check out the gallery of already rebuilt bikes and get an inspiration ►


Battery capacity
Battery location
Motor power
250 W
Motor weight
4,7 kg
50 Nm, peak torque 80 Nm
Motor noise
<55 dB (silent mode)
Torque sensor
To the center axis
68-72 mm
Motor programming
Battery weight
4,3 kg
Battery size
367 x 115 x 90 mm
Optional display
Number of cycles
800 (capacity reduced by max. 30 %)
Nominal voltage
3.7 V
Cell composition
Lithium (Li-ion)
90 -180 km
Charging current
5 A, 2 A
USB output
Walking assistance
Yes (6 km/h)
IP65 protection
Memory effect
O přestavbových sadách EVBIKE

O přestavbových sadách EVBIKE

Přivezte nám své kolo a dostanete zpět elektrokolo. Nebo si můžete přestavbu provést sami pomocí našich videonávodů. Sady si snadno sestavíte podle vašich požadavků - od výkonu motoru, kapacity baterie, multifunkčních LCD displejů až po další doplňky. Pokud nemáte kolo, můžete využít naší nabídky elektrokol GEOMY, což jsou horská kola doplněná o přestavbovou sadu, proto si můžete sestavit elektrokolo podle vašeho přání. Displej, výkon motoru, kapacita baterie, rychlost nabíjení a převodník jsou plně konfigurovatelné komponenty.

Contact us!