Display not included


860.57 EUR

711.21 EUR

Not on stock Not possible to order, wait for stocking. If you have any questions, please contact us.

Product Price incl. VAT Add to Cart
LCD display C961 for mid-drive LCD display C961 for mid-drive code: EVLCD-CMS-C961
57.57 EUR
LCD display C965 for mid-drive LCD display C965 for mid-drive code: EVLCD-CMS-C965
70.48 EUR
Full color LCD display C18 for mid-drive Full color LCD display C18 for mid-drive code: EVLCD-CMS-C18
117.67 EUR 123.95 EUR
Full color LCD display 500c for mid-drive Full color LCD display 500c for mid-drive code: EVLCD-CMS-500C
75.19 EUR

It is necessary to purchase a display to control the set ►

The motor is mounted in the frame instead of the pedal center. Thanks to the fact that the engine is installed in the middle of the wheel, the optimum center of gravity is achieved and driving characteristics are not limited. It is resistant to the ingress of dust and water jets (IP65). The motor is designed for center axles measuring 68 - 72 mm. The advantage of central drives is that they have a range of up to 35% longer than the hub-drive motor. They are so versatile that they can be installed on 99% of series-produced bicycles. More about the motor ►

TIP: In the Parameters, Downloads and Video tutorials tabs you will find all technical information about the whole set, videos for its installation and manuals in PDF.

The EVBIKE 15.6 Ah (562 Wh) battery is designed to be mounted above the rear wheel. The package includes an adjustable carrier. The battery is equipped with a security lock against theft. After unlocking it can be easily removed from the holder, eg during charging or transport. It has a built-in safety red tail light which lights up automatically when the battery is switched on. It is especially suitable for bicycles with a small frame or for city bikes. More about the battery ►

TIP: Connect the charger to the mains first and then connect the charging connector to the battery. Otherwise, the connectors may be damaged.
TIP: Calculate how far you will go with this set. Try our range calculator ►

Package contents:

  • Motor 36 V, 250 W
  • Rack battery 36 V, 15,6 Ah 
  • Charger 5 A
  • Main cable bundle with 4 outputs
  • Speed ​​sensor with magnet
  • Chainring 46T with a protective cover
  • L + R pedal crank
  • Mounting material (screws and nuts)
TIP: Before installing the motor, we recommend purchasing special wrenches to tighten the lock and counter nuts and thread glue.
TIP: If you are wondering if your bike can be electrified, check out the gallery of already rebuilt bikes and get an inspiration ►


Battery capacity
Battery location
Motor power
250 W
Motor weight
4,7 kg
50 Nm, peak torque 80 Nm
Motor noise
<55 dB (silent mode)
Torque sensor
To the center axis
68-72 mm
Motor programming
Weight incl. carrier
6,4 kg
Battery size
460 x 155 x 55 mm
Optional display
Number of cycles
800 (capacity reduced by max. 30 %)
Nominal voltage
3.7 V
Cell composition
Lithium (Li-ion)
80 - 160 km
Charging current
5 A, 2 A
USB output
Walking assistance
Yes (6 km/h)
IP65 protection
Memory effect
Unboxing and installation of a carrier battery

Unboxing and installation of a carrier battery

It only takes a few minutes to install the carrier battery. The package includes all mounting material. The carrier is height-adjustable and is therefore suitable for various bike sizes.

Contact us!